Pacific Northwest X-Ray Inc.

       ESECO-Speedmaster SL-2, Dual-Color, Battery Powered, Portable Sensitometer.       


Stock #
Model Number
Description
Your Price
5010
SL-2
Portable Sensitometer
$918.00
5002
N/A
Power Supply for Above
(120VAC/60Hz Only)
$40.38


ESECO Speedmaster! The SpeedLight SL-2 is the smallest, easiest to use, and most reliable sensitometer available for critical quality control of modern x-ray processing systems. Green and blue sensitive films are pre-calibrated in the SpeedLight sensitometer for precise density exposures. The system operation is simple: (1) select green or blue to match the film; (2) raise the platen and insert the film up to the film stop; (3) close the platen and push the "Expose" button; (4) remove the film after the tone (typically 0.5 sec.); (5) process the film; (6) read control step with densitometer; (7) compare to reference density and take processor action if necessary.

The ideal companion for the SpeedLight SL-2 sensitometer is the PocketPal SM-12 densitometer. The SL-2 exposes easy-to-read numbers and marks that align perfectly with the SM-12 for quick and accurate measurements.

  • Controls X-Ray Processing.
  • Delivers Health-Care Reliability.
  • New Green and Blue LED Technology.
  • Low-Power Battery Operation (9 volt Alkaline Battery Included).
  • Thousands of Exposures per Battery.
  • Low Battery Indicator.
  • The Smallest Size Available (fits in your pocket; 12 oz. or 340 gr).
  • Exposes 20 Precision Density Steps.
  • Exposes Sharp Numbers and Alignment Marks.
  • Perfect Mate to the Popular SM-12 Densitometer.
  • One Year Warranty (battery excluded).


  • Dual Light Source: Green LEDs/525nm, Blue LEDs/470nm
    Exposed Steps: 21 Steps, 0.15 Density per Step
    Exposure Time: 0.5 Seconds
    Warm-up Time: None
    Portable Power Source: (1) 9V Alkaline Battery Included
    Desktop Power: Optional 9V AC Power Supply
    Weight: 12oz. (340.2grams)
    Dimensions: 2"H (5.08cm) 3"W (7.62cm), 4.75"L (12.07cm)




           ESECO-Speedmaster SM-12, Battery Powered, Portable Densitometer.       
    ESECO Speedmaster! The Speedmaster "Pocket Pal" SM-12 has been designed to meet industry's needs for a small portable densitometer. With a range of 0 to 4.00D, the "Pocket Pal" provides a quick and effective method to verify that your B&W or x-ray film processor meets all quality control requirements. No separate light source is required, just insert the film, align the area to be read, and press a button.

    The SM-12 has alignment marks for easy film positioning. Exposed and processed control film should have a density patch at least 0.2" (5mm) wide to avoid critical alignment. The push button switch "wakes up" the PocketPal with a stable reading in 1 second. The digital display indicates density values from 0.00D to 4.00D in 0.01 increments. SM-12 readings are calibrated for films with silver emulsions. Convenient nylon protective carrying case is optional.

  • Convenient Pocket Size (4.5" x 2.5" x 1.15" (114.3mm x 65.5mm x 29.2mm; Weight 5.9 oz. or 167.2 grams).
  • Portable Battery Operation (9 volt Alkaline Battery Included)
  • Digital Display of Film Densities.
  • Consistent Reading Results.
  • Push Button for Instant Readings.
  • Internal Light Source.
  • Low Battery Indicator.
  • Temperature Stabilized Readings.
  • High Density and Low Density Calibration.
  • One Year Warranty (battery excluded).

  • Measuring Aperture: 3mm
  • Measuring Range: 0.00 to 4.00 D
  • Accuracy: ±0.02 D or 1%
  • Repeatability: ±0.02 D
  • Warm Up Time: None
  • Film Measuring Depth: 3" (7.62cm)
  • Portable Power Source: (1) 9v Alkaline Battery Included
  • Desktop Power: Optional 9V AC Power Supply
  • Weight: 5.9oz. (167.2 grams)





  • Stock #
    Model Number
    Description
    Your Price
    5012
    SM-12
    Portable Densitometer
    $918.00
    5002
    N/A
    Power Supply for Above
    (120VAC/60Hz Only)
    $40.38




           ESECO-Speedmaster SM-10T Series Densitometers.       


    ESECO Speedmaster! The Speedmaster® SM-10T and SM-10TCI Digital Transmission Densitometers are designed to meet the need for an accurate and affordably priced instrument to measure any medical x-ray, mammography, NDT x-ray, graphic arts, photographic film or processor control test films. The benefit of over 46 years of ESECO's experience in designing and building reliable quality instruments has been applied to the portable SM-10T and SM-10TCI.

    The proprietary technology employed assures instant, accurate and repeatable results that rivals the same high standards of more expensive units. Featuring total accuracy of +/- .02 from 0.00 to 5.00 Optical Density and compliant with ANSI Standard 5/2-1985 / NBS Standard 1009 - Reference Material ID 057901

    Low power consuming components and extended battery life features are provided in the automatic "stand-by" mode. For added convenience, it may be operated with the UL/CSA-approved plug in a/c power adapter furnished with the Speedmaster SM-10T and SM-10TCI.

    The rugged durability, minimal drift and no warm up time provide fast dependable readings. To illuminate the reading stage, just depress and release the sensor probe. Then simply position the film to be measured over the target aperture and depress the sensor probe. The large E-Z read digital meter instantly displays the reading. It will return to the energy saving "stand-by" mode automatically.

    Backed by ESECO's established ONE YEAR "NO HASSLE" WARRANTY makes the Speedmaster SM-10T and SM-10TCI the ideal cost-effective choice for film processing quality assurance.


  • Measuring Length: (throat) 7.25" (18.4cm)
  • Measuring Range: 0.00 to 5.00 D
  • Measuring Aperture: 2mm (optional 1mm)
  • Light source: White incandescent.
  • Accuracy: ±0.02 D / Repeatability ±0.01 D
  • Repeatability: ±0.01 D
  • Preview Stage: 2.5"x4"
  • Film Measuring Depth: 7.25" (18.42cm)
  • Warm-up Time: None
  • Portable Power Source: (2) 9-volt Alkaline Batteries (Included)
  • Desktop Power: 9V AC Power Supply
  • Stationary Power: A/C Wall Plug-in Power Supply
  • Weight: 2.5 Lbs. / 1.2 kg
  • Dimensions Height: 4.5 Inches (11.4 cm) / Width: 4.5 Inches (11.4 cm) Length: 11 Inches / (28 cm)
  • Optional: RS-232 Serial Output (CAT#5008) transmits via the serial port (9600/8/N/1) the same information shown on the display (3 digits, followed by a CR).
  • Optional: Optional green light source version available for use with dry laser films at no additional cost.

  • * Meets ISO / ANSI Standard - 5/2-1985 / NBS Standard 1009 - Reference Material ID 057901


    Stock #
    Description
    Model Number
    RS-232 Interface?
    Your Price
    5009
    Densitometer
    SM-10T
    No
    $1,484.00
    5009-CAL
    Calibration Fee
    SM-10T
    NA
    $170.00
    5008
    Densitometer
    SM-10TCI
    Yes
    $1,841.00




           ESECO-Speedmaster SM-14, Battery Powered, Direct Reading, Portable Densitometer.       
    ESECO Speedmaster! Speedmaster® SM-14 Digital Densitometer
    Economical -- Portable -- Battery-Powered

    The Speedmaster® SM-14 Digital Densitometer is designed to meet the need for an accurate and affordably priced instrument to measure any film directly from a viewer. The benefit of over 46 years of ESECO's experience in designing and building reliable quality instruments has been applied to the portable SM-14.

    The proprietary technology employed assures instant, accurate and repeatable results that rivals the same high standards of more expensive units. Featuring total accuracy of +/- .02 from 0.00 to 4.00 Optical Density.

    Low power consuming components and extended battery life feature are provided in the automatic "stand-by" mode.

    The rugged durability, minimal drift and no warm up time provide fast dependable readings. With the film on your viewer, place the SM-14's "EASY READ" probe over the area to be read then push the read button. The large digital meter instantly displays the reading. It will return to the energy saving "stand-by" mode automatically.

    Backed by ESECO's established ONE YEAR "NO HASSLE" WARRANTY makes the Speedmaster SM-14 the ideal cost-effective choice for reading film on a viewer.

  • Measuring Aperture: 3mm
  • Measuring Range: 0.00 to 4.00 D
  • Accuracy: ±0.02 D or 1%
  • Repeatability: ±0.02 D
  • Warm-up Time: None
  • Portable Power Source: (1) (9-volt Alkaline Battery Included).
  • Weight: 5.9 oz. / 167.2 grams.
  • Dimensions: Height: 2.5 Inches (6.35 cm) / Width: 1.5 Inches (3.81 cm) Length: 4.75 Inches / (12.06 cm).




  • Stock #
    Model Number
    Description
    Your Price
    5014
    SM-14
    Portable Densitometer
    $918.00
    5002
    N/A
    Power Supply for Above
    (120VAC/60Hz Only)
    $40.38




           ESECO-Speedmaster QC Pal Quality Control Software.       


    Stock #
    Description
    Your Price
    5019
    Processor Q/C Software.
    $295.00


    ESECO Speedmaster! The ESECO-Speedmaster QC Pal software offers superior monitoring and tracking of your processor and other important tasks. Equipped with diagnostics this software will examine and provide a list of likely problems for an out-of-control processor. The QC Pal monitors and tracks the everyday changes of an unlimited number of processors. This program allows you to set scheduled tasks such as morning set up and monthly maintenance checks. It gives you the ability to input control strips readings through a serial port on your computer saving you from the painstaking task of entering multiple numbers.

    Can be used with....
  • Mammography.
  • NDT.
  • Repeat analysis.
  • Task scheduler.

  • Using the QC Pal software along with the SL-2 Sensitometer and the SM-10TCI Densitometer allows you to have complete and accurate control over your lab. This efficient system safeguards you from subjecting your patients to high levels of radiation, misdiagnosis, and helps avoid repeat examinations.

    Features
  • Works with Windows 95, 98, 2000, Me, NT, and XP.
  • Works with any densitometer providing serial output.
  • NEW QC Pal software now includes drivers to accept readings from strip reading or scanning densitometers.
  • User defined high/low tolerances for each processor.
  • Monitor and plot an unlimited number of processors.
  • Processor control diagnostics.
  • Crossover procedure for changing from one batch of film to another.
  • User defined scheduled tasks.
  • Shows plot history for the last 14 days..

  • Click here to download a demo version of QC Pal. Demo works with Windows 95, 98, 2000, Me, NT, XP, Vista and 7.







    Cards We Accept!
    For order methods and policies, please click here.


    E-Mail Sales
    Telephone

    Phone Lines open...
    8am - 5pm Monday-Friday (Pacific/West Coast Time)
    Toll-Free (US): 800-827-XRAY (800-827-9729)
    Toll-Free (US): 866-PNW-XRAY (866-769-9729)
    Skype: pnwxray
    Phone: 1-503-667-3000
    Download our order form
    and then...Fax Your Order
    24 Hours a day!
    1-503-666-8855

    P.O. Box 625 * Gresham, OR  97030 * U.S.A.

    This web site is our catalog, no printed catalog is available. - Please keep checking back, changes to this site are made daily.
    Every effort is made on our part to keep all posted prices up to date, however we can not guarantee the accuracy due to notification delays by the manufacturers.
    Purchase Orders accepted only upon approval of credit - Min. $500 opening order for new open CHARGE accounts.
    All other orders (Cash, Credit Card, etc) subject only to a $30 product minimum order!



    ©1997-2017 Pacific Northwest X-Ray Inc. - Sales & Marketing Division - All Rights Reserved