Pacific Northwest X-Ray Inc.

       Fluke Biomedical Stock Number: 76-711       
PHANTOM, DSA*
Available with three concentrations of iodine!

*This phantom conforms to the recommendations in Report #15 by the American Association of Physicists in Medicine (AAPM)-Digital Radiography/Fluorography Task Group of the Diagnostic X-Ray Imaging Committee.

  • Quantitatively measures high-and low-contrast spatial resolution.


  • Checks linearity, uniformity, amplifier dynamic range, subtraction effectiveness and registration accuracy.


  • Easy-to-use modular format. Buy only the components you need.


  • Every important digital image parameter (Conventional fluoroscopy equipment is used for checking the non-digital functions of DSA systems.) of a DSA system is easy to evaluate with this QA test tool. Its modular format allows you to purchase only the parts needed to test particular parameters. If your needs change, other components of the system can always be added.

    The phantom consists of nine components. When some of them are combined, additional functions can be evaluated. For example, the two-piece step wedge serves as a dynamic range measurement tool. However, when "folded" on itself, it becomes a solid, 3" thick, body block. When used with the slot block, it forms a 6" thick plastic mass that simulates body x-ray absorption during tests.

    Five inserts are available: (1) Low-Contrast Artery Insert has vessels with varying diameters and iodine concentrations. (2) Low Contrast Iodine Line-Pair Insert is used for quantitative resolution measurements. (3) Resolution High-Contrast Pattern Insert accepts lead line-pair test patterns of two different lead thicknesses. (4) Linearity Insert has six regions, each with a different iodine thickness. (5) Blank Insert is used to make the mask images for the others. Also available is a Registration Plate with an all-over hole pattern that detects changes in pixel position between the test image and the mask image.

    CHOOSE FROM THE FOLLOWING SYSTEM COMPONENTS;

    (A) Slot Block (76-712): This 20 x 20 x 7.5 cm acrylic block has an opening that holds and positions the insert sections. 6 lbs.

    (B) Bone Block (76-713): For checking the effectiveness of the subtraction process and its resistance to the formation of subtraction artifacts. Measures 20 x 20 x 2.5 cm and contains three simulated bones (0.5, 1 and 1.5 cm thick respectively and 2.5 cm wide). 3 lbs.

    (C) Step Wedge (76-711): Tests a machine's dynamic range by its ability to subtract all steps. Six acrylic steps, each 2.5 cm high, form a wedge whose total dynamic range is approximately 40:1 depending on the kVp setting. When the upper three steps are "folded" over the lower three, the wedge becomes a solid block, 20 x 20 x 7.5 cm thick. This, together with the slot block, simulates a patient's body attenuation. 7 lbs.

    (D) Blank Insert (76-714): Simulates body tissue before iodine injection when making a mask image. 15 x 20 x 2.5 cm. 2 lbs.

    (E) High-Contrast Resolution Pattern Insert (76-717): This 15 x 20 x 2.5 cm acrylic insert has recesses for holding up to three square lead test patterns. Test patterns are not included with the insert. 2 lbs.

    (F) Linearity Insert (76-719): Six regions, each with a different iodine thickness, are arranged in a circle on a 15 x 20 x 2.5 cm block. Iodine values are 0.5, 1, 2, 4, 10 and 20 mg/cm2. 2 lbs.

    (G) Low-Contrast Artery Insert (76-715): Iodine-filled channels in this 15 x 20 x 2.5 cm block simulate three sets of vessels (0.5, 1, 2 and 4 mm diameter). Each set has a different iodine concentration - 2.5, 5 and 10 mg/cc. 2 lbs.

    (H) Low-Contrast Iodine Line-Pair Insert (76-716): Contains two sets of line-pair groups- 1, 0.7, 0.5, 0.35, 0.25, 0.175, and 0.125 2LP/mm. one set has an iodine area density of 0.5 mg/cm2, the other is 1.0 mg/cm2. Measures 15 x 20 x 2.5 cm. 2 lbs.

    X-Ray Test Patterns for High-Contrast Insert. Resolution range is 0.6 to 5.0 LP/mm. Insert accepts up to three test patterns. Choice of lead thickness: 0.01 mm (07-527) or 0.1 mm (07-538-1 or 07-538.2).

    Registration Plate (76-718): Made of aluminum 20 x 20 x 1.6 mm, with an overall pattern of 3 mm holes. When x-rayed twice, and one image is subtracted from the other, the resulting picture shows any pixel misregistration that may have taken place between x-rays. Misregistration correction is easily tested. 4 oz.
    Stock #
    Description
    Your Price
    76-711
    Step Wedge
    $819.56
    76-712
    Slot Block
    $291.17
    76-713
    Bone Block
    $758.46
    76-714
    Blank Insert
    $311.45
    76-715
    Low-Contrast Artery Insert
    $414.79
    76-716
    Low-Contrast Iodine Line Pair Insert
    $622.17
    76-717
    High-Contrast Resolution Pattern Insert. Does not include Test Pattern(s).
    $165.60
    07-527
    Test Pattern, 0.01mm thick.
    $414.79
    07-538-1000
    Ultra high precision test pattern, 0.10mm thick.
    $654.86
    07-538-2000
    Precision Test Pattern, 0.10mm thick.
    $414.79
    76-718
    Registration Plate
    $244.53
    76-719
    Linearity Insert
    $622.17
    76-705
    Artery Block (from 76-700 phantom), with 15mg per ML venous concentration.
    $785.41
    76-705-1150
    Artery Block (from 76-700-1150 phantom), with 150 mg per ML arterial concentration
    $785.41
    76-705-1300
    Artery Block (from 76-700-1300 phantom), with 300mg per ML arterial concentration
    $711.57



    Cards We Accept!
    For order methods and policies, please click here.


    E-Mail Sales
    Telephone
    All Lines open 8-5 M-F (Pacific Time)
    Toll-Free (US): 800-827-XRAY (800-827-9729)
    Toll-Free (US): 866-PNW-XRAY (866-769-9729)
    Normal: 1-503-667-3000
    Download our order form
    and then...Fax Your Order
    24 Hours a day!
    1-503-666-8855

    P.O. Box 625 * Gresham, OR  97030 * U.S.A.

    This web site is our catalog, no printed catalog is available. - Please keep checking back, changes to this site are made daily.
    Every effort is made on our part to keep all posted prices up to date, however we can not guarantee the accuracy due to notification delays by the manufacturers.
    Purchase Orders accepted only upon approval of credit - Min. $500 opening order for new open CHARGE accounts.
    All other orders (Cash, Credit Card, etc) subject only to a $30 product minimum order!



    ©1997-2010 Pacific Northwest X-Ray Inc. - Sales & Marketing Division - All Rights Reserved