|Film Transport Method.||Continuous roller transport.|
|Film Types and Sizes.||Sheet film from 10cmX10cm|
up to 35cmX43cm (14"X17")
|Process Cycle Switching.|
|90sec, 120sec, 180sec|
|Processing Solution Volumes.|
|Dev: 3.9 liters (1.0 gallons)|
Fix: 1.8 liters (0.5 gallons)
Wash: 1.4 liters (0.4 gallons)
|Chemical Recirculation System.||Continuous pumping of both|
developer, and fixer solutions.
|Temperature Control.||Developer solution temperature:|
Controlled by constant heat exchange with the cold wash water, and an
electronically controlled heater in the developer solution in a "push-pull"
arrangement which helps maintain tight temperature control.
Film Dryer temperature:
Electronically regulated according to an internally adjusted
|Replenishment System.||Automatically supplies according to film size.|
|Wash Water Requirement.||Requires ordinary tap water in the 41°-86°F (5°-30°C)|
Water pressure 49-686kPa (0.5~7kgf/cm2)(7~98psi)
|Water Consumption.||0.8 liters/min.|
(Power Saving Mode)
|Internally Selectable by service engineer|
10min / 30min / Continuous operation(disable)
|Power Source.||AC 115/120VAC, Single Phase, 12Amps, 60Hz|
|Weight.||40kg (88lbs) with the tanks empty,|
47kg (104lbs) with the tanks full
|Heat Generation.||Approx. 3,135 kJ/h max.|
|Noise Level.||Approx. 55dB(A) max.|
|Operating Conditions.||59°~86°F (15°~30°C), 30%~75% RH (no condensation)|
|Included Accessories.||Measuring cup, Funnel, Installation parts kit, Replacement|
parts kit, Replenisher tanks, and Operation manual.
|Optional Equipment.||Light shield panel, Stand, Splash guard.|