Standard Tilt & Rotate Mobile CR-Plate/Cassette Holder.

Tilt & Rotate; fully articulating holder. Fixed arm length provides maximum stability. Arm slides vertically on 60" chromed steel post. Vertical range as measured from bottom of cassette/plate: Floor level up to 54" above floor. 18" square steel shelf base, with protective rubber mat, rises 4" above the floor. Heavy base prevents tipping. E-Z-Roll swivel casters (two are locking). Neutral Almond baked enamel finish. Maximum cassette thickness 1¼". Ships in two cartons: 1 box @ 15lbs., 1 box @ 70lbs. One year warranty. Stock # Your Price MCH-33B $793.08

Extension Arm Tilt & Rotate Mobile Cassette Holder.

Extends plate/cassette 11" to 23" from post. Fully articulating holder. Arm slides vertically on 60" chromed steel post. Vertical range as measured from bottom of cassette/plate: Floor level up to 54" above floor. 18" square steel shelf base, with protective rubber mat, rises 4" above the floor. Heavy base prevents tipping. E-Z-Roll swivel casters (two are locking). Neutral Almond baked enamel finish. One year warranty. Once you have a unit that includes the mobile base/post, you may choose to add additional holders to your system for a greater range of utility. Stock # Description Your Price MCH-37B Extension Arm Tilt & Rotate Complete Mobile Unit Package Deal. (Contains: Base, Post & Extension Arm Holder) $850.83 MCA-B31B Separate Component: Mobile Base (NO Post) $320.30 MCA-P31B Separate Component: Posi-Lock Post $311.28 MCA-S33B Separate Component: Standard Holder. (Not for DR Plates, Use MCA-D40B Instead!) $233.20 MCA-E37B Separate Component: Extension Arm Holder $266.17 MCA-T39B Separate Component: Tall Cassette Holder $272.06 MCA-D40B Separate Component: DR-Plate Holder $233.20

DR-Plate Holder with no tilt or rotate.

Stock # Description Your Price MCH-40B DR-Plate Holder(Non-tilt or rotate) $795.79

Holds up to 14" X 17" DR-Plates Lateral position only (non-articulating) Arm slides vertically on 60" chromed steel post. Vertical range as measured from bottom of cassette/plate: Floor level up to 54" above floor. 18" square steel shelf base, with protective rubber mat, rises 4" above the floor. Heavy base prevents tipping. E-Z-Roll swivel casters (two are locking). Neutral Almond baked enamel finish. One year warranty.

Tall Cassette Holder.

Tall Lateral Cassette Holder holds 14" x 36" and 14" x 51" cassettes. Lateral position only, no articulating movement! Arm slides vertically on 60" chromed steel post. Vertical range as measured from bottom of cassette/plate: Floor level up to 54" above floor. Will accommodate CR Plates up to 1¼" wide. 18" square steel shelf base, with protective rubber mat, rises 4" above the floor. Heavy base prevents tipping. E-Z-Roll swivel casters (two are locking). Neutral Almond baked enamel finish. One year warranty. Stock # Description Your Price MCH-39B Tall Cassette Holder (Non-tilt or rotate) $830.08

Soyee's Mobile Cassette Stand.

Mobile Cassette Holder Great for cross-table laterals, lateral decubitus views, and any situation where you need an extra pair of hands. The holder is fabricated of welded steel tubing with a durable, easily cleaned, cream-colored, powder-coat finish. Casters (3") provide easy mobility and are lockable. Vertical height adjustment of 29"-47" (737-1194mm) from the floor to center of the cassette. The holder accommodates cassettes from 8 x 10" through 14 x 17" with or without a grid. A spring loaded clamp firmly fixes the cassette in place yet allows easy removal of the cassette/film for processing. Horizontal and vertical movement (7-15" and 29-47" respectively) is fixed via positive acting screw-type locks. The cassette may also be rotated to either side of the vertical axis by 90 degrees to provide additional positioning versatility. The unit is counterweighted to offset the weight of the cassette on the extended horizontal arm. Weight - 53 lbs. Stock # Your Price SY-CSH $678.57

Table-Top, Cross-Table Lateral Cassette Holder.

Improved Wider Channels are adjustable from Base to 24". Eliminates hand held plate/cassette hazards. Enhances Technologist's Safety. Securely holds plate/cassette in a stable, upright position. Both 6" wide channels adjust to fit cassette. Holds up to 14" x 17" (35 x 43cm) cassettes. Accepts Grid Cassettes and CR plates. (Channel is 1 ¼"D). Base plate slides under patient or pad. Upper channel includes a rotating R & L marker. Both Upper & Lower Channels are lined with rubber to keep all types of plates/cassettes in a stable position. Shipping weight: 7 lbs.

Stock # Your Price 35 $209.88

Bar-Ray's Mobile Cassette Holder.

This all metal Mobile Cassette Holder is used to hold cassettes/grids (8"x10" to 14"x17") during mobile procedures. Unit stands on a sturdy three leg base with swivel locking wheels. Finish is putty enamel. Measures 46" tall with a 16" height adjustment. This unit features a L/R Tilt only. See 69294 for L/R & Up/Down tilt. Stock # Description Dimensions Grid Size Your Price 62856 Mobile Cassette Holder, L/R Tilt 46" tall, 16" height adjustment 8"x10" to 14"x17" $785.71 69294 Mobile Cassette Holder, with L/R & Up/Down tilt 46" tall, 16" height adjustment 8"x10" to 14"x17" $885.71

---

For order methods and policies, please click here. E-Mail Sales Telephone All Lines open 8-5 M-F (Pacific Time)Toll-Free (US): 800-827-XRAY (800-827-9729) Toll-Free (US): 866-PNW-XRAY (866-769-9729) Normal: 1-503-667-3000 Download our order form and then...Fax Your Order 24 Hours a day! 1-503-666-8855 P.O. Box 625 * Gresham, OR  97030 * U.S.A.

This web site is our catalog, no printed catalog is available. - Please keep checking back, changes to this site are made daily.
Every effort is made on our part to keep all posted prices up to date, however we can not guarantee the accuracy due to notification delays by the manufacturers.
Purchase Orders accepted only upon approval of credit - Min. $500 opening order for new open CHARGE accounts.
All other orders (Cash, Credit Card, etc) subject only to a $30 product minimum order!


©1997-2010 Pacific Northwest X-Ray Inc. - Sales & Marketing Division - All Rights Reserved