 |
|
|
|
| Maxant Techline Series Iluminators. |
 | 
The TECHLINE features a universal illuminator body design that incorporates the most commonly requested features and
benefits desired by diagnostic imaging professionals. It is offered in the 200 Series (2 lamp light source), 300 Series
(3 lamp light source) and 400 Series (4 lamp light source) lighting configurations. This product concept allows the
customer to incorporate their preferred light source into the TECHLINE design. The TECHLINE can be configured in the
MAXANT Diagnostic Viewing Center (DVC) family of mounting accessories.
The DVC Angulation System creates a fixture with a vertical top tier and
an angled bottom tier at 20 degrees. The DVC Corner System provides
effective use of awkward corner space. MAXANT also manufactures
illuminators for Orthopedic Physicians, the Spine-TECHLINE
(14" x 36" and 14" x 51" viewing areas); Podiatrists, the Mini-TECHLINE (12" x 24" viewing area); and Mammographers, the Mammo-Lume (for Mammography film formats 18cm x 24cm and 24cm x
30cm)*Viewing height is actually 16.5" in order that extraneous light is eliminated when standard 14" x 17" film is inserted in the Roller Gravity Grip. **Overall Recessed Fixture dimensions, including recessed trim length and height, are each 3" greater than Surface Mounted Dimensions. SPECIFICATIONS: Body Construction: 18 Gauge Welded Steel construction, 3-3/8" deep body. Ballasts: All ballasts are U.L. listed and C.S.A approved rapid start, low leakage, thermally protected, Class P type. These ballasts have self starting reliability exceeding 10,000 cycles with an anticipated 50,000 hours of operating life. Line Cord and Plug: Each surface mounted fixture comes standard with a grounded chassis, 7' line cord and NEMA 5-15P 2-pole, 3 wire ground. Film Grip: Roller gravity film holding system accommodates all film thickness variations. This grip will not scratch or tear film. Requires no field adjustments. Open sides facilitate viewing of oversize film. Continuous Bottom Film Ledge: Allows for the placement of small film formats on the top and bottom of viewing area. Finish: Baked white finish is bonded to all steel surfaces to provide durable chip and wear resistant outer |
| surface Highly reflective inner finish provides optimal light distribution. Diffusing Panel: 1/8" shatter resistant, U.L. Listed translucent thermoplastic. Switches: The standard two position rocker switch provides manual ON/OFF lighting for each viewing area. Engineered Two Tiered Fixture Design: Two tier configurations have a minimal separation of 1.8" between tiers allowing for convenient top to bottom image comparison. Engineered Design for Easy Servicing: Viewing panel is easily removed without tools. Fixture is serviceable without having to remove fixture from wall. Individual wireway panels can be easily removed for direct access to problem panels. Cluster Switching: Individual rocker control switches are a STANDARD feature and are centrally located at the bottom of the fixture, configured in the same layout as the viewing panels they control. U.L. Listed and C.S.A. Approved OPTIONAL FEATURES: Film Activated 3 Position Rocker Switch: Provides for manual ON/OFF and film activated mode which activates the viewing area when a film is inserted into the film grip. Master Switch: Provided master ON/OFF control of the entire fixture. Hospital Grade Plug: Heavy duty plug specified in certain municipalities. Surface Mount Hardwiring: Single electrical power exit location on the rear of fixture allows for surface mounted fixtures to be directly wired to the wall. Diagnostic Viewing Center Angulation and Corner Mounting: Angled mounting: top tier vertical and bottom tier angled at 20º maintaining centralized Cluster Switching located at bottom center of fixture which controls top and bottom tiers. Corner Mounting: creates an effective solution to awkward corner space. Please note: Published light output readings below are 3% less than actual test levels to allow for decreased light output as a result of normal usage. These light levels are taken from procedures specified by the German DIN 6856 standard. Currently this is the only published standard for evaluating the luminance levels of x-ray illuminators. These levels were measured under the following conditions: an ambient temperature of 21º Celsius (70º Fahrenheit). 118V line voltage, and new lamps. Light levels measured in the field may vary with the local environment, including: lamp age, line voltage, ambient temperature, and lamp temperature. These measurements are subject to change without notice. For those who are interested in portability, Maxant does offer a Handle & Feet option. |  |
|
|
|
|
 |
|
